Common sense and advantages that operators of small hand-held rollers should know

Full hydraulic compact rollers are compact and convenient, easy to operate, easy to learn, and flexible, so the operating radius is small, and construction can be carried out in narrow sites, such as trench backfill; because all hydraulic compact rollers generally use international and domestic well-known engines. Therefore, the performance of the roller is relatively stable, the power is strong, the fuel consumption is low, and the performance is relatively superior.

Fully hydraulic compact rollers are mainly used for ditch backfilling, road and sports ground paving and other operations, with a wide range of applications. The whole hydraulic compact roller has a compact structure, small size, easy transportation and high work efficiency. It can be used with large rollers. At the same time, the operating handle can be adjusted to provide a comfortable operating environment for the staff and facilitate transportation or storage.

Walk-behind rollers have many applications in the construction industry. The use of small-sized rollers requires common sense of operation and correct operation. Today, the editor summarizes some common-sense issues that operators of walk-behind rollers should understand. Take a look if you need them.

1. Operators of hand-supported rollers must be certified to work. Non-professional drivers are strictly forbidden to work. Do not leave the post without authorization during work, and do not operate machinery that does not conform to the operation certificate.

2. Operators are strictly forbidden to work after drinking, and it is strictly forbidden to hand over the hand-held roller to a person without a license to operate the machine.

3. The operator must strictly implement the pre-work inspection system and pay attention to observation during work and the inspection and maintenance system after work in accordance with the provisions of the machine manual.

4. Do not operate with overload or malfunction. If there is any problem during the operation of the walk-behind roller, it should be shut down immediately for inspection.

5. When the walk-behind roller is parked at the construction site, the parking place should be selected and the parking brake should be pulled on. When parking on a ramp, use triangle wood or stones to hold the wheel against the wheel. Special personnel should be supervised at night;

6. During the operation period, non-construction personnel are strictly prohibited from entering the construction area, and construction personnel are strictly prohibited from chasing and making trouble when entering the construction site.